Veloce 400 Plane – Gen 2 – SOLD

SOLD

Veloce 4 Place Plane – Gen 2

Kit for $39,700 or Build Assist for $150,000

Over 50 Flying with a 30 Year Proven Track Record

Simple Efficient

All Composite like Cirrus

Affordable Kit Plane

4 place fixed gear kitplane that cruises up to 170 kts
with engine options from 160hp to 260hp.

Keeping it Simple, KIS – plane does not have any complicated systems to worry about. Plane was developed to lesson the builders workload and requirements. Making it easier, quicker and faster to build.

The kit contains all materials required to complete the airframe. In excess of 100 premolded composite parts are the bases to assembly. Constructed of high temperature epoxy resin pre-impregnated fiberglass and carbon fiber with either Divinycell foam or honeycomb cores cured under vacuum pres- sure at 250 degrees (F). They are strong, light weight, and assem- ble quickly. All prefabricated metal parts are prewelded. Not included in the kit are: Engine/Mount, Instruments, Avionics, Paints, Interior Upholstery and Battery.

This kit has already had some work done. Estimated assembly is about 1200 hours for the average builder from scratch, but is maybe 30% build. Have photos and build logs from the previous builder.

Can build with you at our build center in NC and complete for $175k, with Aerovolare engine, and full Garmin suite of Avionics including IFR certification. You pick leather and paint – done in 6 -10 months.

$150k with dynon/garmin combo panel of 6 year old avionics

If you are willing to have these avionics and panel, instead of a full new garmin suite, can do the plane for $150k at our build center with your help: VMS 1000C Engine monitor, Dynon EFIS D-100, Dynon HS34, TruTrak Digiflight II Autopilot with GPSS and altitude hold, PS Engineering PMA 8000BT audio panel with marker beacons and Bluetooth, Garmin 430W, Garmin GTX 335 Transponder, and Garmin GPS Map 696.

We can also do another engine of your choice, more or less depending on what you want.

Or the not fully completed plane/kit with avionics $39,700, and about $50-$75k more and you can build it ready to fly yourself with Aerovolare 260 HP naturally aspirated engine.

Specifications
  • Length Overall 25.5 ft.
  • Wing Span 29 ft.
  • Wing Area 135 sq. ft.
  • Height 7.5 ft.
Cockpit Width
  • Front Seats 44 in.
  • Rear Seats 42 in.
  • Cockpit Height 46 in.
  • Cockpit Length 78 in.
Weights
  • Empty Weight 1200 lbs.
  • Gross Weight 2300 lbs.
  • Useful Load 1100 lbs.
  • Fuel Capacity 52 gal.
Performance
  • Top Speed (sea level) 190+ mph
  • Cruise Speed (sea level) 175 mph
  • Stall Speed 55 mph
  • Range 800+ miles w/reserve
Rate of Climb
  • Average Weight 1300 fpm
  • Gross Weight 1100 fpm
  • Take Off Roll 1000 ft.
  • Over a 50 ft. obstacle 1200 ft.
  • Landing Roll 1300 ft.
  • G Loading Standard Category
  • V-Maneuver Speed 145 mph
  • V-f (max flap speed) 110 mph
  • V-ne (never exceed) 215 mph
Prices:

$39,700
Not fully completed plane/kit with avionics

$89,700 – $114,700
Build it on your own (not fully completed plane/kit $39,700 and about $50-$75k more and you can build it ready to fly yourself with Aerovolare 260 HP naturally aspirated engine)

$150k
Completed with you in our build center with these avionics and panel (VMS 1000C Engine monitor, Dynon EFIS D-100, Dynon HS34, TruTrak Digiflight II Autopilot with GPSS and altitude hold, PS Engineering PMA 8000BT audio panel with marker beacons and Bluetooth, Garmin 430W, Garmin GTX 335 Transponder, and Garmin GPS Map 696.)


This is the panel you would get for $150k

$175k
Completed with you in our build center with full Garmin suite of avionics and IFR – and Aerovolare engine. Can do different engines for a price difference.

Located in Whiteville, NC

 

Other used planes: